Subconsciously, we all think that stainless steel screwswill not rust. In fact, it is not. Under the harsh environment, stainless steel screws will rust after being corroded. Therefore, rust is actually a relatively common situation. However, when we use stainless steel screws, most of them are used indoors or on some electrical equipment. The working environment is relatively good, and there is no pollution of seawater and strong acid atmosphere, The probability of rusting is relatively low, so the phenomenon of rusting will be less.
We can only say that the anti-corrosion performance of stainless steel screws is particularly good. It has a strong corrosion resistance to the ordinary atmospheric environment, but it will still rust when used in coastal areas. It is this difference in the use environment that requires a necessary understanding of some basic properties of stainless steel screws in order to reasonably and effectively use stainless steel screws. Under different temperatures and temperature conditions, we can choose different stainless steel screws, such as 304 stainless steel screws or 316 stainless steel screws.

The anti-corrosion of stainless steel screw material mainly relies on the use of some element content of the material itself to resist atmospheric corrosion. In theory, the structural change of the improved material can also resist corrosion. However, stainless steel screw is a standard part, and it is not feasible to carry out the transformation of metal materials in the case of mass production.
When we use and install stainless steel screws, we must pay attention to some places. The stainless steel screws that are installed on the site must be stored in a clean and ventilated place. During installation, we must also pay attention to whether there are stains in the teeth of the stainless steel screws. Such stains will become the source of corrosion after a long time outdoors. Attention should also be paid to the temperature change during installation. If the temperature difference is too large, water vapor will be generated. At this time, the installation should not be contested. The screws should be placed and dried before installation to avoid sealing the water vapor at the thread.

In fact, the rust prevention of stainless steel screws mainly depends on the protective film layer on the surface of the material. This protective wax is similar to an electroplated layer of carbon steel bolts. It is this protective film that isolates the metal structure layer from the air, so that the stainless steel screws do not rust. As long as this protective film is damaged, that is the time when the stainless steel screws start to rust. Therefore, stainless steel screws do not rust, but are not easy to rust.





