High strength bolts are a common fastening component, and tightening them during use is the most important part we value. Therefore, many people will ask: how to tighten high-strength bolts? What are the methods for tightening high-strength bolts? Based on years of experience, Xiaorui will provide the best answers to this series of questions.
1. Torque method
According to the proportional relationship between torque M and pre tension, first use a regular wrench to preliminarily tighten the nut, and then use a specialized wrench that can display the torque value to tighten it to the specified torque value.
2. Corner method
A method determined by the proportional relationship between the rotation angle of high-strength bolts and the pre tension of bolts after close contact between the layers. When tightening, first use a short wrench to tighten the nut to the non rotating position, and then use a long wrench to tighten the nut to the specified position to achieve pre tension.
3. Twist off the tail of the bolt
Used for torsion shear high-strength bolts, this bolt has a specially designed tail. When tightening, use a special wrench to cover the bolt and the end of the bolt. One sleeve rotates forward and the other rotates backward. When the nut is tightened to a certain degree, the end of the bolt breaks. Due to the fact that the depth of the groove at the end of the bolt is determined by the relationship between the breaking torque and the pre tension force, the corresponding pre tension force value is reached when the bolt is broken.
Reminder: In high-strength bolted connections, the magnitude of the friction coefficient has a significant impact on the load-bearing capacity. Experiments have shown that the coefficient of friction is directly related to the material of the component, the roughness of the contact surface, and the magnitude of the reverse force, with the main factors being the form of the contact surface and the material of the component. In order to increase the friction coefficient of the contact surface, the contact surface of the components within the connection range should be treated during construction, using methods such as sandblasting and cleaning with a wire brush.






